[Free available] How to use Auto Gain Stager from FL Studio

[Free available] How to use Auto Gain Stager from FL Studio

How to use Auto Gain Stager from FL Studio, which I wrote yesterday.

[Free available] Introducing Auto Gain Stager, a plug-in that automatically adjusts the volume

[Free] Introduction of Auto Gain Stager, a plug-in that automatically adjusts the volume Human ears feel that the louder the sound, the better the sound.Check out the video below.At first, the RMS is not aligned and the compressor is turned On and Off with Bypass. When it is On, the sound is thick.

chilloutwithbeats.com

2022.08.19

You can simply use Patcher, but if you create it and save it as a preset, you can recall it immediately when you want to compare it, which is convenient.

This article will be sent with the following contents.

How to use Auto Gain Stager with Patcher

By using Patcher, you can check Dry and Wet at the same volume just by turning Patcher on / off.

The method is very simple.

First, load "Auto Gain Stager" into the mixer.

Open "Auto Gain Stager" and press the "Listen" button while the sound is playing.

Then load "Patcher".

Open "Patcher" and load the plug-in you want to compare and "Auto Gain Stager".

Here, "Vari Moon" by Analog Obsession is used.

"Vari Moon" can be used for free, so if you do not have it, please read the following article.

[Free available] Vari-Mu Comp VariMoon updated to v5 at Analog Obsession

[Free] Vari-Mu comp VariMoon updated to v5 by Analog Obsession Analog Obsession's VariMoon is updated to v5. Fairchild 670 type Vari-Mu compressor. Vari Moo...

chilloutwithbeats.com

2022.08.19

Connect as follows.

After that, change the setting of the plug-in (here, "VariMoon") that you want to compare with the Dry sound.

Finally, open "Auto Gain Stager" and press the "Listen" button while the sound is playing.

Now you have the volume of the plug-in you want to compare and the volume of Dry.

You can compare by turning On / Off of "Patcher".

How to save the state of the created mixer to a preset

Save it so that you can easily recall it next time.

Then you can listen and compare immediately next time.

Click "File"-> "Save mixer track state as…" from the ▼ on the upper left of the mixer.

The shortcut is Shift + Ctrl + s .

Save it in an open location with a suitable name.
(Mixer presets should open)

For the time being, it is safer to avoid Japanese names.

It seems that there is no problem if you check it, but there is a possibility that it will hit a problem in a strange place.

Now you can save the state of the mixer.

If you want to read it, you can do it from "Open mixer track state" or it will be displayed in "File".

[Free available] Summary of how to use Auto Gain Stager from FL Studio

Even if you know that it is important to compare, it is troublesome and you may not compare.

I think how to lower the hurdle for that, so I want to make good use of the preset function of FL Studio.