- 3 Reasons to Highly Recommend FL Studio for DTM Beginners
- Reason 1 The cost is low
- Reason 2 Startup is fast anyway
- Reason 3 There is no troublesome activation (protection)
- Summary of 3 Reasons to Highly Recommend FL Studio to DTM Beginners
3 Reasons to Highly Recommend FL Studio for DTM Beginners
Oita awareness has risen in the last few yearsFL StudioHowever, I think that few users are still using it.
Therefore, yosi, which has been used since the FL Studio 4 era, is recommended for those who will start DTM from now on, or those who are already doing DTM but are thinking about switching to DAW.3 reasonsI will explain firmly.
This article explains:
・Reason 2 Startup is fast anyway
・Reason 3 Activation is easy
Reason 1 The cost is low
Yes, first and foremost is the cost.
Purchase price, then update price.
When starting DTM, you want to reduce not only the initial cost, but also the additional costs.
Is there an additional cost?For those who thought that,The cost of updating a DAW is not crazy.
I will explain the story in detail.
Price for each edition of FL STUDIO 20
The editions and prices of FL Studio are listed below.
*Prices are updated regularly, but please note that they may differ.
(Price update date August 2023, 8)
| Edition type | Suggested retail price (Tax not included) |
BeatCloud |
Amazon (tax included) Key Points |
| FL Studio 21 Signature | 39,600 Yen | ¥28,600 286 |
¥31,709 317pt |
| FL Studio 21 Producer | ¥24,200 242 |
\ 25,859 |
|
| FL Studio 21 Fruity | 19,800 Yen | ¥14,300 143 |
¥14,222 142pt |
| FL Studio 21 Signature Commentary book bundle |
41,800 Yen | - | ¥33,471 335pt |
| FL Studio 21 Signature Cross grade Commentary book bundle |
27,500 Yen | - | ¥22,111 221pt |
| FL Studio 21 Signature Cross grade |
25,300 Yen | - | ¥17,125 514pt |
| FL Studio 21 Strategy Book | 3,520 Yen | - | ¥3,520 106pt |
First of all, there are 3 types of editions + cross grade version and a package version in Japan with a commentary book set.
To be clear, all but FL Studio 21 Signature should be excluded.
as a choiceFL Studio 21 Signaturedo you buyFL Studio 21 Signature CrossgradeThen the next question is whether or not to attach a reference book.
(It is better to attach a reference book.)
Reasons to exclude other than FL Studio 20 Signature
First of all, the differences between editions are listed by Mr. Hookup.
However, even if you look at this, I think that it is refreshing before purchasing.
I will explain in detail for those who are convinced and want to purchase.
Why I Don't Recommend Buying Fruity Edition
First of all, the number one reason for removing the cheapest Fruity Edition from the purchase option is that it can not handle audio.
(There are few other plug-ins that can be used, so it is an edition that you should never buy.)
Below is the comparison table.
If you buy Fruity Edition without knowing it, you will definitely regret it.
Especially since you can get free sample packs, you can make a song just by arranging the audio clips.
This is just arranging the riffs and drums, but it will be like this in less than 3 minutes.
However, to make a song without using audio clips, typing is required.
Suppose you have an input like this:
Below is how the lead is driven.
Here is how the drums are driven.
If you don't have knowledge about typing when you start DTM, please avoid Fruity Edition.
You will almost certainly fail and not continue.
Why I Don't Recommend Buying Producer
Next is the difference between Producer and Signature.
The functionality of both DAWs is exactly the same.
The Signature Edition comes with the following 10 plugins.
-Newtone
-DirectWave Full
-Harmless
-Gross Beat
-Hardcore
-pitcher
-vintage chorus
-vintage phaser
-pitcher
-Fruity Video Player
However, thisThere is only a difference of about 10 yen with 7.000 plug-ins.
and most of youGross BeatI think you will want it.
aftervintage chorus,vintage phaserIs also recommended.
But laterGross BeatEven if you want it, you can buy this plug-in at a low price even if you buy oneIt costs about 5000 yen ($ 39.00 at the lowest sale).
I prepared a simple demo.
Without Gross Beat.It's a simple drum loop.
Multiplying GrossBeat makes this easy.
Gross BeatPlease read the following article for details on how to use.
The cheapest way to buy FL STUDIO 20 Signature
Learn how to buy FL Studio 20 Signature at the lowest price.
Broadly dividedIf it's okay to take a little timeとIf you want it right awayThe purchase method is different.
If you don't mind taking a little time to purchase 1 (Mercari, Yahoo Auction)
The cheapest way to buy is rarely listed at Mercari or Yahoo AuctionUnregistered productIt is a pattern to buy.
For example:
Although it is a cross grade, it is 12000 yen without registration.Even if you don't have a DAWACID Music Studio (about 6 yen), etc.You can purchase FL STUDIO 2 Signature for less than 20 yen.
There aren't many, but if you have the time, you may find it if you keep an eye on it.
If you want to purchase immediately (those who do not need Japanese language support)
This is a cross-grade version, but in fact, it seems that those who can register officially on their own can register even if they do not have the target software for cross-grade, just because the Japanese agency supports it.
so at firstcross grade versionand try to see if you can register officially, if notAcidIt is also a hand to buy etc.
If it may take some time to purchase 1 (SOURCENEXT)
There is a high possibility that you can buy this one a little more, but the price is almost the same as buying it immediately.
However, the software you can get for the same amount of money is quite different.
SOURCENEXT is quite frequentSaleI am doing.
In itACID PROYou may be able to purchase it for about 5000 yen.
What you can buy on AmazonACID Music StudioIt's much better.
If you have time, we recommend that you purchase it when SOURCENEXT is on sale.
If you want to buy immediately
I want it tomorrow!If you say that, it's already on AmazonFL Studio 21 Signature Cross Grade Explanation This Cross Grade VersionとACID Music StudioLet's buy.
It is better to have a strategy book.
There is a lot of information on the internet, but it is troublesome to operate while switching screens, especially at first.
-Click here to purchase ACID Music Studio
Total cost comparison between FL STUDIO and other DAWs
Considering the total cost of FLStudioOverwhelmingcheap to.
I have never paid for a version upgrade.
Many DAWs sell from time to time, but it's easy to fly around 1 with each version upgrade.
Purchase price
I checked it lightly. (Prices change every day, so please be patient with some differences.)
First is the purchase price required for introduction.The prices below are for each productMiddleweight editionCollected.
Live ¥53,800
Cubase Artist 10 ¥ 29,160
Studio One 4 Artist ¥ 12,800
FL STUDIO 20 Signature ¥ 26,460
LogicX (Mac only) ￥ 23,800
The cheapest is
It's ¥ 4 for Studio One 12,800 Artist.
Next is Logic's ¥ 23,800, but only for Mac. Windows users are excluded.
If you are a Mac user, Logic is the best choice.
(However, it is necessary to update the OS so that support will not expire)
Next is Cubase Artist 10 and FL STUDIO 20 Signature, and the popular Live is by far the most expensive.
At first glance FL Studio 20 looks expensive,
Considering the upgrade price, the story changes at once.
Upgrade price
Live 10 Standard upgrade from Live Standrd 1-9 ￥ 19,800
Cubase Artist 10 upgrade from Artist Ver9.5 ¥ 8,600, from Artist Ver9 ¥ 15,120
Studio One 4 Artist upgrade from Studio One 1-3 ¥5,074
FL STUDIO 20 Signature upgrade \0
LogicX upgrade None (¥ 23,800)
First,There is no other free upgrade than FL Studio.Moreover, other DAWs have different upgrade prices depending on the edition, and if it is the highest, it will jump up.
FL StudioHas "Lifetime Free Updates", which provides free software updates.
Honestly, I would like to pay for each update and buy it myself rather than having an unnecessary Synth.
For FL Studio, the new plugin is paid (Harmor,Transistor Bassetc.).
Recently, there are many patterns that are free, and FL Studio 20.5 included a synth called FLEX for free!
Please listen to the sound.It's hard to think of other DAWs that this comes with a free update.
(Logic is a little different, but ...)
Please read this article for details.
Moreover, three new effects have been added in version 21.
(If you use Signature, you can use all of them)
- LuxeVerb (All Plugins Edition)
- vintage phaser (Signature Bundle+)
- Multiband Delay (Producer Edition+)
Reason 2 Startup is fast anyway
I think the time it takes to start up is quite important.
The time from double-clicking the icon to making a sound,FL StudioI think it is the fastest.
Live, Reason, and Cubase all take at least 15 seconds to start.
(Maybe more)
And every DAW takes more than 10 seconds to read the sound.
In the environment of Surface 6FL StudioWas able to make a sound in XNUMX seconds.
(within 3 seconds on desktop)
The reason it is fast is that it does not check licenses or plugins at startup.
I took a video of the startup.
Reason 3 There is no troublesome activation (protection)
haalkab / Pixabay
The more rigorous software fraud measures are, the more wasteful they will be and the more costly they will be returned to the user.
Cubase still needs a USB key.
(It seems that it will finally be abolished in version 12, but I am concerned about alternative protection)
To buy a USB key4,000 YenIt takes a lot of money and consumes one USB port.
Moreover, when starting up, check the existence of the USB key, and you cannot start up without the USB key.
FL StudioLoad the license key into your PC and you're done.There is no limit on the number of units.(Recently logged in by user name)
You can put it on both your desktop and laptop, or even use it at the same time.
afterThe demo version has only one limitation."Can't open saved project'is.only this.
Moreover, if you purchase it, you can open the saved project.Nothing is wasted.
Other than that, there are no restrictions on the period or functions. WavYou can even export.
You can decide whether to buy or not after using it until you get tired of it.
It's my opinion, but manufacturers shouldn't spend too much money on copy protection.
And the problem is that the cost of copy protection is imposed on legitimate users.
Cost is not just the price, but the time it takes to activate and its limitations.
For example, the number of activations, the maximum number of activations, reactivation when the OS is changed, etc.
The worst thing is that people using pirated editions don't pay this cost at all, only legitimate users bear this cost.
Summary of 3 Reasons to Highly Recommend FL Studio to DTM Beginners
People who recommend FL Studio
If you are interested in FL Studio, I recommend the following articles.
Youtube shows how EDM artists are actually using it, and I have summarized it.
If you have purchased FL Studio, please also read the summary page below.
(I explain various things in quite detail)
People who don't recommend FL Studio very much
FL Studio does not support MIDI messages such as System Exclusive, MSB, LSB.
Therefore, if you want to control the hardware sound source using system exclusive, you should use another DAW.
Comment
In the section of "People who do not recommend FL Studio very much"
＞ People using Mac
There is, but it is compatible with Mac from Ver.20 or later.
Also, "The demo version has only one limitation." I can't open the saved project. " ", But
You can no longer save the project from the trial version of Ver.20.
(Although it was possible up to 12 of the previous version)
thank you for your comment.
>, But it is compatible with Mac from Ver.20 or later.
As for the Mac, I think Logic is one of the best in terms of cost and functionality, so I use that notation.
> You can no longer save the project from the trial version of Ver.20.
I didn't know this at all.
Thank you for the information.
I will correct the article.
I'm trying out the FL Studio 20 trial version, but I've saved the project.
When I saved it, I felt that a link to the purchase page appeared with the following message.
FL Studio is in trial mode.
You can save this project but you must buy FL Studio to open the project again
By the way, when I tried to open the saved project, the following message appeared and I could not open it.
This project was saved while FL Studio was in trial.
Please buy FL Studio to open the project
For your information.
If you don't need Hoo ○ up support for the cross-grade version, you can register only the head family, and the cross-grade registration looks like it's through, but what about it?
Thank you for the useful article.
banana
Thank you for the information!
I used to get information from a comment that I couldn't save it since I became FL Studio 20, and I only used it as a cormorant.
(You have to try it yourself)
Try it a little and rewrite it.
Thank you so much for writing the message properly! !!
Yeah?
Is that a proper story?
It means that you can normally register as a head family, right?
However, there is certainly no talk about cross-grade in the head family, and it may be that the Japanese agency is doing it without permission.
I don't know how much support the Japanese agency will support, but I feel that it is unnecessary for those who can google to some extent.
Thank you for valuable information!
[…] 3 Reasons to Highly Recommend FL Studio for DTM Beginners | Chillout with Beats […]
We become indebted to.
I have a question.
When I put the FL in the tray, it stops working. Is there a setting I can make to browse with Chrome while making sounds?
Or is it specs?
There is no problem with MPC, so can it be done?What do you think?
Thank you.
Mr. Yuu
Wouldn't you like to improve the menu "OPRIONS" -> "Audio" -> "Auto close" by On or Off?
Thank you professor.
I have successfully achieved my goal.
Thank you all!
I'm playing while reading the Grossbeat article now.
Mr. Yuu
Thank you professor.
It was good.
GrossBeat is very convenient to use, so please learn how to use it.
Long time no see.
Thanks to you, I touch it every day, so I can touch it a lot compared to before.
If you can understand the following, I would be happy if you could teach me.
I would like to know how to remove the automation when a XNUMXrd party effect is playing in the pattern.
I was able to change the automation value on the piano roll screen, but I can't delete it.
I was able to delete the automation when I moved the pattern to the playlist, but it remains in the state where it is sounding in the pattern.
Sorry if it's hard to understand.
Mr. yuu
Hello, it's been a long time.
I'm glad you're still using FL Studio.
I think it might be the article below.
https://chilloutwithbeats.com/flstudio-automation-reset/
If not, please comment again.
Thank you for your reply.
It's the above method, but I've seen it in other videos and tried it once.
Even if you delete the Initialized controls, it will remain.
I thought it might not be compatible with third-party products, but it's the same for effects in FL.
Mystery is.
Shouldn't it correspond to the events in the pattern?
I couldn't right click the knob or fix the event.
Isn't it better not to automate in patterns?
I entered above
>> I was able to delete the automation when I moved the pattern to the playlist, but it remains in the state where it is sounding within the pattern.
Possibly, it seems that I was not able to delete it due to my lack of recognition.
Mr. yuu
Maybe it's Event data?
Event data is stored in patterns.
If you want to delete it, after displaying it from "Control" in the piano roll, it will disappear with the Delete tool.
I'm sorry.
Maybe you sent the same message twice and it may not have been sent correctly.
If you haven't sent it, please leave a comment.
Please add one more thing.
After all, there are many times when the operation is unstable, but I'm starting to understand the difference between FL and MPC, and I'm trying to use MPC in FL because it's easier to make beats and chops.
Is it a rough usage to put the sound sources assembled in MPC into WAV files and arrange them in a playlist?
If you combine beats and high-end items with MPC, all the tracks are packed into one pattern, so I don't think it's a very good use.
From my current knowledge, I feel that the MPC is a way to convert each track, such as drums, high-quality material, and bass, into WAV and arrange them in a playlist.
Is this method like recording to Edison and arranging it in a playlist?
Or is there a way to arrange the sound sources assembled with MPC as they are in the playlist?
How will it be used in cooperation with the machine?
I don't know if I can tell you, but I would be happy if you could give me some advice on the above.
Thank you.
Mr. yuu
I don't know the specifications of the MPC, so I can't say anything about it, but as you said, I think it would be better to output Wav from the MPC and arrange it in the FL Studio playlist.
Switching between two screens is inefficient, so I thought it would be better to be able to concentrate on one screen.
However, I think that it is a little troublesome if you need to make some adjustments as a disadvantage of Wav.
Is there a function like STEM output for export etc.?
I think there's probably a function like outputting each track to a separate Wav.
In the case of Machine, you can switch scenes with FL Studio's piano roll, so I don't think you have to force it out to Wav.
If MPC can also switch scenes (patterns?) from FL Studio in the same way, you may not need to export Wav.
Thank you for your reply.
>> If you want to delete it, after displaying it from "Control" in the piano roll, it will disappear with the Delete tool.
I've found it up to this page, but where is the Delete tool?
I found a video and found MIDI and audio export.
Actually, there is a problem that the play button on the MPC itself does not work in FL, and I thought that MPC would be difficult in FL, but from the MPC settings, is it a MIDI driver?was put into the PC and set, it became possible to operate FL playback with MPC.
I was wondering if I could ask anyone about this, but I'm glad I solved it.
There are also setting items such as which DAW to use for recording.
This made it a lot easier.
I found the page of the MIDI setting of this site and became a chance to look for it.
Thanks.
It seems that you can not operate MPC from the piano roll.
If it's a machine, can it be changed from the piano roll?After all, the cooperation may be different.
Is the M32 keyboard you mentioned before complete select now?It seems that it will also be attached, so I will purchase it.
Considering the price of select, it's like free.
Mr. yuu
You can select from the icons at the top of the screen.
I'm glad it was resolved.
I feel that the production environment is in place.
Maschine can switch scenes with MIDI notes, so it's easy to share work with FL Studio.
I highly recommend the M32.
It certainly comes with KOMPLETE 14 SELECT!
I think now is a good time to buy.
Expansions are also included, so you'll have plenty of Mashine sounds from the beginning.
Thank you for your reply.
I was able to erase the wave itself with Delete, but is it possible to return the event itself to its initial value?
I was interested in machine software, so I think it's time to buy now.
I'm solving what I don't know about cooperation.
Thank you all!
Mr. yuu
The initial value has probably been overwritten by "Init song with this position", so please reset it to the initial value and then execute "Init song with this position".
If you haven't done "Init song with this position", just delete the Event data and you're back to normal.
I think that Maschine is suitable if you drive with a pad like MPC.
And now is the best time to buy.
Since Select is not usually attached, there is a considerable difference.
Thank you very much.
Completed without incident.
If you have any further questions, please let me know.
感謝
Mr. yuu
Thank you for contacting us.
It was good.
Please comment if there is anything else.
We become indebted to.
I have one question, but when using FL, there is a good chance that the software will crash with effect plug-ins, but if you make some adjustments, it will stop crashing.
Are there any setting items?
Is it better to check the error item properly?
It's a bit crusher called Samplex3.
Mr. Yuu
Good evening.
If you try it, it's the two I'm writing in the following article.
I think that most of them will be solved by trying these two.
https://chilloutwithbeats.com/flstudio-use-fixed-size-buffers/
Thank you for your reply.
i will try.
After all, the movement of MPC is unstable, so I will try it with the above method.
In the video of a foreigner, I confirmed that the MPC sound source is being played on the piano roll in the FL, but when I try to switch to the piano roll screen, the FL freezes.
You may need to do something similar to the above.
Mr. Yuu
You may be able to go with "Make bridged".
You won't know until you try all this.
We become indebted to.
The above effector may be compatible with FL.
Both methods will fail if used at the same time.
MPC may be a little more stable.
Also, I installed the Machine software without any problems, but is it possible to play XNUMX sounds without a pad?
I've searched for various videos, but I don't understand
With a keyboard, you can only play the sound of one pad in a scale.
Where are the settings?
Mr. yuu
When you say "simultaneous use", does it mean that you have multiple devices running?
Since it does not fall in my environment, there may be some other factor.
It was great.
I think I could have played 16 of them without using pads.
I can't remember where I was for a while.
There is a Japanese manual, so please read it.
https://www.native-instruments.com/fileadmin/ni_media/downloads/manuals/maschine_2_6_8/MASCHINE_MK3_Getting_Started_Japanese_2017_11.pdf
I'll check it out when I get home.
Mr. yuu
There are settings in the following locations for how to make Kit sound from the Maschine keyboard.
Thank you for your reply.
>> It doesn't fall in my environment, so there may be some other factor.
Is there no problem in yosi's environment without the above improvement method?
It was crashing even when I applied it to multiple tracks, but when I checked how long it would take to crash, I put a loop on XNUMX tracks in song mode and looped it while looping it and displayed the effector on the mixer screen, and in my environment it almost crashed. .
The error disappears too quickly so I don't know what I'm writing w
In my environment, there are times when the compatibility between the external SSD and the PC is poor, so that relationship may also have an effect.
Even when MPC is unstable, it may be involved
This is how much it falls with the effector I use often
I like it, so I'd be happy if I knew why
Thank you for the manual.
I couldn't find it.
I played XNUMX notes on the Maschine keyboard.
Thank you all!
I will read the manual as well.
Mr. yuu
Samplex3, right?
It won't fall off if it's mine.
It may be because it was confirmed in a fairly simple state.
I checked with Use fixed size buffers enabled.
make bridge is disabled.
It would be nice to use a Maschine plug-in after a long absence.
However, I'm a bit discouraged because I've run into a problem where the Lontakt library (NKS) can't be read well...
There is no problem loading Kit, so I think I'll use it only for beat making.
Hello
Samplex3, right?
>> That's right
Even with the same settings as yosi, it is down.
Turning on make bridge seems to make it unusable.
I'm looking for a bit crusher and trying it out, but Decimort2 is good.
I'm waiting for the sale.
I tried using Maschine for a while, but I feel that it is quite similar to MPC.
Maschne may feel more like a Pad too.
MaschineThere is such a problem.
I haven't used kontakt that much yet.
I see a lot of NKS words.
Can't you fix that problem?
We are also considering upgrading Konplete.
Thank you all!
Thank you again.
Mr. yuu
Why?
Recent plugins may not be so simple as they also affect GUP.
"Make bridge" is no good either.
Decimort2 is a good bit crusher.
I'll let you know when the sale comes.
I can't make detailed adjustments, but have you tried the "Mode" of Maschine's playback engine?
If you want to play the Maschine Kit, I recommend this because it has a pretty good texture.
I don't know if this is probably because the library is stored on a different drive or because the library was taken over from the previous PC, but I haven't been able to fix it even after investigating and trying several solutions.
There aren't many people making noise, so it may not be a problem that occurs frequently.
NKS is a standard that lets you load Kontakt snapshots (like presets) directly from Maschine.
It simplifies the work of opening Kontakt normally, opening Library and opening snapshots.
Select to Standard is highly recommended.
It extends Maschine considerably.
I will write a sale article, so please wait a moment.
We become indebted to.
Please ask questions about pluginboutique.
There was a new version of Samplex3, so I installed it, but I can't activate it.
I am registered with BeatSkills and logged in from the DAW plug-in.
When I looked at it, the serial code was listed as version 3, and I thought it might not be compatible with the new one, but what about it?
The character length is different from the current Beat Skills serial code.
If you use NI, you can update it with the app, but if you buy it from pluginboutique, you have to update the version yourself, so I thought it would cause trouble. What do you think?
I have already contacted pluginboutique and am waiting for a response.
Mr. yuu
Good evening.
I'm just wondering, what version is the new version of Samplex3?
SampleX_WIN_v3_3.5_8824 is the latest as far as I can see officially.
Hello!
Thank you for your reply.
Regarding the version, when I purchased it from pluginboutique, it was 3.0.0 (this is the part where the FL I consulted above was dropped), but 3.1.0 was newly available for download.
When I checked today, the serial code was changed and I was able to activate it.
I haven't been able to confirm that it's falling so far, so maybe it's fixed.
I unzipped the file and checked it, but in the property information, the version information is 3.0.0, so it's a mystery w
Maybe the official version is different.
I tried to open it from the DAW and wondered if I could check the version, but it doesn't seem possible.
Mr. yuu
What is it?
This is a bit of a mystery.
Did support help you out?
Glad you solved it for now.
This is where I really want to do something.
I think it's natural to put out the version information properly, but... it's a shame.
Good morning!
Thank you for your reply.
I don't know when the latest version was added, but it may have been contacted by support.
It's too good timing to be updated yesterday today.
Samplex3 I used it all the time yesterday, but the crash has been resolved lol
If the plug-in is not the latest version, problems may occur, so I remember seeing somewhere that I should update to the latest version. It is natural that there is a difference between
I would like to be able to check the version.
I would like to ask about how to operate FL.
(XNUMX) I'm thinking of using shortcut keys to reduce the number of operations on the first browse screen.
I can't switch the PC keyboard with Ctrl + T by switching the piano keyboard, and AUto in the playlist?It is a shortcut key with a marker.
There was a time when I was able to use Ctrl+T, but I don't know in what state it can be used.
It seems that you can not use shortcuts of English characters using Ctrl.
The input of the PC is also half-width English.
Is there any way to deal with this situation?
(XNUMX) Sometimes the image when playing sounds in the sample browser is red. What does it mean?
Also, this is another matter, but I've been interested in Omnisphere 2 and Trilian recently, do you have them?
If you have it, please let me know how it feels to use it.
Thank you.
Mr. yuu
It was good.
It works with Ctrl + T with something other than Playlist selected.
Do you have a sample like the one below?
If so, it is a sample with a loop set.
You don't have to worry about it as long as you use it normally.
I think it was for setting where you want to loop when using from the sampler.
I have both, but I haven't used Omnisphere 2 and Trilian at all since I didn't switch over to PC.
It used to be expensive but ahead of its time, but recently it feels a little outdated.
Is the music you make closer to Trap or Hiphop?
I think it's better to collect sound sources used by artists you like rather than sound sources that are popular in the world.
Good evening!
Thank you for your reply.
I see
Since it is a shortcut key for the UI of FL, it is not reflected even if it is pressed on the playlist screen.
Ctlr + T worked successfully with other selections.
I will be a little more aware.
Thank you very much.
That's what the sample red means.
I understand
What I'm making is completely HIPHOP.
BOOMBAP and LOFIHIPHOP of simple HIPHOP, so cutting edge synth? I've been looking into (Salem, etc.), but I don't use synths in most of my creations, so I'm not very interested.
Rather than that, I feel like I often use sample LOOP sound sources.
It's attached to the Massive, Monarch, and FL that were attached to the current complete, but it feels like it's too much to handle lol
As far as Omnisphere2 and Trilian are concerned, the UI looks very old-fashioned lol
It's been quite a while since it was released.
I'm in trouble because there is no trial version for that price.
Trilian is looking for a raw bass sound source, and MODOBASS is also included in the purchase target, but I compared both sound sources and Trilian sounded better, so I'm looking into it.
I would like to have Trilian's wood-based sound source.
I think it might be possible to upgrade the complete to standard and use a live bass in a guitar rig.
It seems that there is also a MODO-based plug-in
It just doesn't seem like it's a wood base
I'm using my favorite artist's MPC or SP404, so it's not very helpful.
I think you're probably using a DAW to make the sound.
FL is used by an interesting beat maker, and I'm interested in it, and it's like now.
Finally, my knowledge of FL and DTM has increased, and I'm rereading yosi's FL articles and understanding the contents.
Thank you all!
Mr. yuu
Sorry for late reply.
It's probably, but I think it's easier to create a Loop system + a little synth.
Hiphop itself is a sampling culture, so I think that processing Loop will bring you closer to the image you want to create.
So Omnisphere2 is still not recommended.
The UI has gotten better over time, but I still find it difficult to use.
I really want the trial version because the price is the price.
How about trying this on a loop basis first?
Also, UJAM's MELLOW 2 might be good.
This is a registered phrase, so it can be recombined.
It was good.
I'm glad that you continue to use FL without frustration.
Hello!
Thank you for your reply.
I think it's easier to make a loop system + a little synth.
I will keep this in mind when creating the above.
Omnisphere2 doesn't seem to fit.
Confirmed.
What do you think of the complete upgrade?
There is no problem with sound source loops at all, but I haven't found a wood bass or a bass sound source that I think is good.
I'll look into UJAM's MELLOW 2.
Thank you very much.
No, no, this is it. Without yosi, I think I'm definitely frustrated or not able to master the functions.
The Japanese manual is very difficult to read.
I want you to do something because the fl book is only written at the bare minimum.
I have an additional question, but I'm getting latency when using the plug-in.Is it better to fix this?
I would like to know if I should care.
UI for fl!I am concerned about the mark.
Also, the FL upgrade to all plug-ins is now XNUMX% off, but I'd like to know what kind of evaluation it is from yosi's point of view.
Maybe it will be in the article...
Mr. yuu
I recommend this one.
It goes well with Hiphop.
I added a sound demo yesterday, so please take a look.
https://chilloutwithbeats.com/nativeinstruments-komplete-14-sale/
There are other 40s VERY OWN DRUMS and BUTCH VIG DRUMS in this series, and the 40s VERY OWN DRUMS has a Trap sound, so I think it can be used for Hiphop.
Also, Maschine's passion will increase considerably, so Maschine's kit will increase in large quantities.
Basically don't worry about it.
It automatically adjusts with a function called PDC.
I think the sound sources that were added were Sakura, Harmor, and Morphine, but it's been a while since their release and it feels outdated.
It hasn't been updated in a long time, so I can't wait for future updates.
Harmor is a type of synth system that is unique, but it is unique and difficult to understand the specifications.
Sakura is a physical model sound source and may be used for Hiphop and Trap.
It can be used as a demo version, so please try using it and judge.
Good evening!
Thank you for your reply.
I will consider upgrading the complete.
If you look at the sale trend, maybe you will come again at the end of the year even if you miss it this time?
I'm interested in the EMPIRE BREAKS introduced in the article.
Also, there are some sound sources that can only be used in the full contact version.
Thank you for the latency answer.
There is a function called PDC.
I'm glad I asked because it didn't come out even if I looked it up.
It was the first time I heard of it.
I tried the FL additional plug-in trial version, but I don't know how to use the synth, and I don't know the presets.That's what I felt.
It hasn't been updated at all.
This was information that I would not have known if I hadn't been told.
Thank you all!
If you have any further questions, please let me know.
Mr. yuu
Good evening.
EMPIRE BREAKS is also good, and similar types of sound sources such as Butch Vig Drums and 40's VERY OWN DRUMS are also included.
This is the same type of sound source as EMPIRE BREAKS, so I recommend it.
I feel like the year-end sale was only for regular products.
I don't remember if Komplete was also covered.
However, NI has more sales than before, so there may be a sale on Black Friday.
The only thing that worries me is the depreciation of the yen.
Mr. NI, the price will not change due to some exchange rate fluctuations, but if it exceeds a certain amount, it will go up at once, so you need to be careful.
Still, I don't know what will happen at the end of the year (maybe the yen has appreciated), so I think it's better not to overdo it.
I think it's better to stop if you try it and it doesn't fit.
All the FL sound sources are really old, so I can't recommend them much these days.
(However, Harmor has no other similar synths, so it cannot be replaced even if it is old.)
Good evening
After worrying, I purchased an upgrade and Mellow to KOMPLETE 14 STANDARD.
Mellow was not included in the options, so I'm glad you let me know.
I liked the trial version and it was good timing when the sale came, so I did my best and purchased it.
Thank you for your consultation.
Mr. yuu
Good evening.
Oh, get the KOMPLETE 14 STANDARD Nesuka!
It works well with Maschine, and the number of sound sources increases at once, making music production fun.
And you bought Mellow too!
I'm glad you liked it.
Please take advantage of it and make a cool song.
thank you for your reply.
I will touch various complete.
I have a question.
Is there a way to convert patterns such as EMPIRE BREAKS to WAV or MIDI using contacts?
As far as the UI is concerned, it seems that there is no conversion like MPC
I came up with the idea of using Edison, but I felt that it was quite troublesome.
Also, I received a coupon to buy a Plugin Alliance plug-in for $29.
Mr. yuu
Good evening.
You can output MIDI by dragging and dropping the icon on the upper left of each pattern of "Pattern".
This coupon can be tricky.
Plugin Alliance has a sale of 29 dollars, and the number of plug-ins that can be purchased using coupons is limited.
The target is only the plug-in of the following link destination.
https://www.plugin-alliance.com/en/products/k14_bundle.html
However, during the $29 sale, most of the following plugins, excluding newly released plugins, will be $29.
https://www.plugin-alliance.com/en/products.html
So if you don't have a reason to want a specific plugin right now, it's better to wait.
Have you tried using the LO-FI-AF that came with Komplete?
I think it goes well with Hiphop.
Good morning!
We become indebted to.
I'd like to use a plug-in that loops MIDI code, but I can't find the synth that comes with FL to match the MIDI channel to an arbitrary number from the settings.
What should I do?
It was an easy-to-understand video from the explanation image line of slice x.
I can do this with MPC, but I don't know what to do with Slice x.
It would be helpful if you could put out a lot of things like that.
Mr. yuu
Hello.
In the case of the synth attached to FL, it is necessary to use Patcher.
Check out this article.
https://chilloutwithbeats.com/flstudio-native-plugin-setting-midi-in/
Slicex videos are great.
Imageline has become a big company, so I think it will strengthen its system.
I think there will probably be more in the future.
Good morning!
You have to use Patcher.
I will read the article.
I didn't have a chance to use Patcher, so it's a good timing.
Thank you all!