How to use Voltage Modular Nucleus How to add a free module XNUMX
This is yosi from Chillout with Beats.
I noticed that the number of free modules has increased.
That's why I would like to introduce the free module.
Click here to get the free Voltage Modular Nucleus
So, in this article, I will send you the following contents.
・ Introduction of Vult Knobs mixer with free Attenuverter
Introducing the Free LFO Mini LFO
There was also an LFO before I knew it.
Nucleus has only a mini LFO and can't output sine waves, but with it you can output various waveforms.
Also, since the width is narrow, it will not get in the way when using a lot of LFOs, so users with Core should also get it.
Overview
This module provides a powerful LFO in a small package (3HP).Ideal if you want to place many independent modulators in different locations of the patch without taking up a lot of space.
Equipped with 6 waveforms that can be toggled: sine, ramp, square, triangle, saw, sampling noise.You can select the rate with the main knob and the slow, medium, and fast (up to audio range) rate range with the switch on the right.You can also select the polarity with the switch on the left.
Inputs include an input for controlling the rate with a CV with an attenuator and a reset input for hard syncing the oscillator.
The output has its own level control, you can adjust the oscillator output according to your purpose, and it is also useful for organizing in a small space.
This module is a powerful module in a very small package to give you the flexibility to design patches when space is limited, such as when working on a small screen for studio or live performances. Part of a collection of Benard mini modules intended to be offered.
As you can see below, the basic waveforms are covered and the speed is perfect.
(From super slow to high speed)
It is also easy to switch to + or-.
If you put another LFO in the CV, you can further modulate it.
How to download
Downloading is easy.
Launch Voltage Modular, click "Sotre" and enter "mini" in the search window.
"Mini LFO" will appear at the top as shown below, so click "Free".
Click Add To Library.
This will add it to your Library.
Click the Modules tab and enter Mini in the search window.
Two are displayed, but the vendor name is "Benard".
Introducing Vult Knobs mixer with free Attenuverter
This is also good.
You can also input an LFO with a mixer and control it.
You can easily adjust the amount of LFO mixing and the amount of change.
Overview
Knobs is a simple but very useful utility. The Knobs have four inputs with an attenuator and a large offset knob.For example, Knobs can be used for various purposes such as blending many modulation signals and sending them to one output destination, as an audio mixer, or as a constant voltage output.document
Knobs has two similar sections.Most elements of the interface are unlabeled.
Mode: Defines the behavior of the large knob.
Uni: Generates a unipolar signal in the range 0V to 10V.
Bip: Outputs a bipolar signal from -5V to 5V.
Mix: The big knob acts as a master level control and adds all signals.
Large knob): Defines the output offset voltage according to the mode.
Small knob): These are attenuators that control the amplitude of the input signal below.
Output jack): Outputs the combined signal: Outputs with the attenuation corresponding to all inputs plus the main offset defined by the big knob.
How to download
Launch Voltage Modular, click Sotre, and enter Vult in the search window.
"Vult Knobs" will appear at the top as shown below, so click "Free".
Click Add To Library.
This will add it to your Library.
Click the Modules tab and enter Vult in the search window.
How to use Voltage Modular Nucleus How to add a free module XNUMX Summary
It's free, but it's pretty good.
There are some other free modules, so I will write an introductory article separately.
And I came up with a new idea, so I will write an article soon.
HoweverVintage Voice BundleI demoed it, but it's good.
If you haven't demoed it, please give it a try.
Comment