How to use Softube Modular DAW sync explanation

table of contents

How to use Softube Modular Explanation of DAW sync
1. Google translation of DAW sync manual + α
  1. Overview
  2. Output
2. How to use DAW sync
How to use Softube Modular DAW sync commentary summary

How to use Softube Modular Explanation of DAW sync

This is yosi from Chillout with Beats.

I will also write a commentary on Softube Modular.

Google translation of DAW sync manual + α

Overview

This module is an efficient way to get clock pulses synchronized with your DAW. Connect the 16 note outputs, click the sequencer module, and connect the reset pulse output to reset to the module's most common application.

Output

1/1:This jack outputs a short pulse on the first beat of each bar.

1/4: This jack outputs a short pulse at each beat (quarter note).

1/8: This jack outputs a short pulse every eighth note.

1/16: This jack outputs a short pulse every eighth note.

1/32: This jack outputs a short pulse every eighth note.

Reset: Reset: This jack sends a short pulse when you start your DAW.

Run: Run:This jack sends a high (+ 5v) signal while the DAW is running.

How to use DAW sync

A common use for DAW synchronization modules is to supply clocks to sequencer modules.For example, connect the 1/16 output to the clock input of the sequencer module and connect the reset output jack of your DAW synchronization to the reset input of the sequencer.
The Run Jack can be used with Logic Tool Modules, Sequencer Gates, etc. before sending to Envelope Gate In.This ensures that the ADSR gate input is not kept high when the DAW goes down.

I found the above in the manual, so I tried it.

If you use the sequencer as it is, when you stop the DAW, it will stop at the state where GATE is output to ADSR, so it will keep ringing, but if you insert Logic Tool as shown below, GATE will be output only when both are ON. It will be like.

I wrote about Logic in detail in another article before, so if you are interested, please refer to it.

Explanation of Voltage Modular BOOLEAN LOGIC

This is yosi from Chillout with Beats, an explanation of Voltage Modular BOOLEAN LOGIC.It's going to be a bit of a maniac direction, but whether or not you have a solid understanding of this area will make a big difference later.First of all, the manual Goo...

I played with the sequence.

After all the sound is really wonderful.

How to use Softube Modular DAW sync commentary summary

This sound is good even if the operability is compromised.

It also has a considerable advantage in that it can be easily linked with a DAW.

Softube Modular is on sale (until October 10st), so if you like the sound, check it out.

Click here for the sale venue