How to get Maschine software virtually free

2019 03 04 17x11 37 Ntive Instruments
Sponsoring

Overview

This is yosi from Chillout with Beats.

This blog is an affiliate, but I only make blog posts that I really recommend.

And I will dig deep into the recommended products on the blog and write articles.

So, as the title suggests, we'll show you how to get Maschine software virtually free of charge.

To be clear, I don't think many people are using Maschine even though it's really great.

Since it is a set with hardware, it may not be a candidate to purchase.

Reasons for virtually free

Released the other dayCOMPLETE CONTROL M32HowMASCHINE ESSENTIALSComes with.

COMPLETE CONTROL M32 Is quite cheap at 13,500 yen, but the included software alone exceeds its value.

2023 03 04 19x16 08

 

Breakdown of virtually free

The hardware alone is worth it, but the bundled software alone is well worth it.

Let's look at the breakdown.

First, the bundled software is as follows.
Some are distributed free of charge, so ignore them.

Attached software
● Ableton Live 10 Lite: Music production software
● MASCHINE Essentials: A 1.6 GB hand-picked library of full versions of MASCHINE software and samples, one-shots, loops, and instruments.There is also an option to upgrade to the full version of the MASCHINE factory library, KOMPLETE 12 SELECT.
● KOMPLETE KONTROL software
● MONARK – Legendary Monophonic Synthesizer
● REAKTOR PRISM – Physics Modeling Synthesizer
● SCARBEE MARK I – Electric Piano
● KOMPLETE START – Contains 17 types of sources and effects, as well as loops and samples.

First of all, the price of this keyboard is 13,500 yen.

The following are valuable bundled software

Ableton Live 10 Lite \ 1,200 (successful bid price at auction)

MONARK ¥ 12,800 (fixed price)

SCARBEE MARK I ¥ 8,780 (fixed price)

MASCHINE ESSENTIALS (I personally think it's the most valuable, but it's a non-purchased item, so \ 0)

Total amount of software \ 22,780gifbanner?sid=3447001&pid=885693644

Yes, it easily exceeds the price of the keyboard itself.It also comes with an E-VOUCHER worth ¥ 3,180 that can be used at the Native Instruments online shop.

And yet, it comes with MASCHINE ESSENTIALS!

But ESSENTIALS?I think that's right?

I looked it up.

What is MASCHINE ESSENTIALS?

Is MASCHINE ESSENTIALS a simplified version?However, MASCHINE itself is a full version.It's just that there are only a few recorded sounds. It seems that it comes with the same MASCHINE Factory Selection as MASCHINE Mikro.

Currently, there are two types, Full MASCHINE Factory Library and MASCHINE Factory Selection, which are attached to MASCHINE.

The differences are as follows.

2019 03 04 16x43 09

There is also an Upgrade Path from MASCHINE Factory Selection to FULL MASCHINE LIBRARY. (A link is attached to the image.)

Personally, I don't use the Factory Library so much, so I don't recommend upgrading.
Rather my favoriteExpansionI think it's better to look for and buy.
(There is a voucher for ¥ 3,180, so you can buy one for about half the price.)

2019 03 04 16x55 50

 

Summary

To be clearCOMPLETE CONTROL M32I highly recommend it.

Those who are new to DTM, who are looking for a MIDI keyboard, or who are having trouble driving drums such as EDM or DubStep should buy it.

You can easily create a track like this with just the software without the hardware of MASCHINE.

I wrote about this track in the following article.Actually, you can do it without Maschine hardware.

2019 02 24 10x58 20
Maschine Tips 25 How to rebuild a new loop from multiple loops
Maschine Tips 25 How to reconstruct a new loop from multiple loops This is yosi from Chillout with Beats. Dig deeper into Native Instruments Maschine's TruTorials to accumulate ideas...

 

Comment

  1. Yuu Than:

    We become indebted to.
    I've been interested in machines for a long time, but after reading this article, I wanted one.
    Are there any uneasiness factors when trying to use the machine in FL?
    It's cheaper than when the article was written.

    • yosi Than:

      Mr. Yuu

      Are there any uneasiness factors when trying to use the machine in FL?

      I think Maschine is good.
      I was able to use it from FL Studio without any problems.
      I didn't feel any particular inconvenience.
      I just stopped using Maschine after hurting my finger, so I haven't kept up with the latest information.
      (That's why there are no Maschine articles lately.)

      Maschinen's articles will be gradually removed.

      It's cheaper than when the article was written.

      Thank you for the information.
      It's a strange situation that the yen is cheaper than when I wrote the article, but it's cheaper.
      I've fixed it for now.

  2. Yuu Than:

    Thank you for your reply.

    After all, MPC and FL seem to be incompatible.
    If there seems to be no problem with FL and machine compatibility, there is an introduction.
    I'm also interested in the difference in workflow with MPC.
    It was really great information that it can be introduced with just XNUMX.

    There were many articles about machines, so I was impressed that you were touching various things.
    You haven't touched me since you hurt your finger
    There's something magical about making a song while hitting a pad, isn't it?

    Read before deleting the machine article.
    Thank you all!

    • yosi Than:

      Mr. Yuu

      After all, MPC and FL seem to be incompatible.
      If there seems to be no problem with FL and machine compatibility, there is an introduction.

      That's right, if you use MPC, Live seems better.
      The M32 might be perfect for Yuu.
      It comes with ABLETON LIVE 11 LITE and MASCHINE ESSENTIALS, so you can try both.

      There's something magical about making a song while hitting a pad, isn't it?

      That's right, I think there are phrases and grooves that are unique to pads.
      It's different than a keyboard.

I copied the title and URL