[Free] Proclethya's Proclethya is free with coupons (until 7/31)

I tried using it, but this is good!

It's a quality that isn't free.

If you turn on the HQ of the Engine, the CPU load will increase, but the treble part will be much cleaner. (If Off, it can be used as a Lo-Fi sound)

Unfortunately, Mac is not yet supported.
(But let's just get it)

Overview

Dymai Sound's Proclethya is a software synthesizer with analog characteristics.It was developed with the three basic principles of analog in mind. DRIFT, NOISE, DISTORTION.This synthesizer features dual oscillators with doubling capabilities, FM shapers, analog filters, unison per oscillator, SUB & NOISE oscillators, dual mix modes, powerful arpeggiators, EQ, FX and more ...

The Synth

Oscillator A has five waveforms (sign, saw, square, triangle, noise).You can set the pulse width of square wave and triangle wave.Both Oscillator A and Oscillator B have a second overtone oscillator, which can be activated by pressing the "5nd" button.The doubling oscillator can be detuned, and by forcing the output to be monaural, you can get a slight combing effect, which is great when creating pads. The Drift “knob provides pitch changes and drifts, as found in older vintage hardware. Unison, detune and spread control for up to 2 voices is per oscillator.

Oscillator A is routed to its own global tuning and FM shaper module.Tuning can be set individually for octave, semitone, and fine tune. The FM button turns on the FM shaper and the FMA setting sets the amount of dry / wet modulated sound. CRS can set the roughness of the FM oscillator, and FIN can set the fine adjustment of the modulation. COL sets the sound color of the shaper oscillator.

LFO Modulator

The two oscillators are routed to the MIX module and can be operated in two ways.CROSSOVER that can be morphed between oscillators A and B, and a MIX method with individual level faders for each oscillator. You can switch between the two modes by clicking on the MIX label. You can turn the sub and noise oscillators on and off by clicking the SUB and NOISE labels, respectively.

A filter section with standard parameters such as cutoff, resonance, drive, keytrack, and multiple filter modes (analog, ladder, etc.).A separate module with high-pass and low-pass filters for each oscillator for easy layering.Post filter saturation is also possible.

Plug-In Formats

Windows “VST2/VST3” 64bit
Mac: Not Available Yet!