セ ー ル 情報
・July 2022 $3
・July 2022 $11
Zynaptiq's UNFILTER is on sale.
Recommended points
At first, I thought it was only possible to reproduce the original sound from the filtered sound, but UNFILTER is amazing.
You can use it like an exciter, use it as an EQ, and extract the frequency response as an IR.
For the time being, I applied it to the sound with the highs removed by EQ.
Another thing that I personally liked is that it is possible to adjust considerably when reading IR and sounding.
The following video adjusts the frequency band to apply IR from the state where IR is loaded.
At first it starts from flat (same as bypass).
To explain a little, first you can adjust how much IR is applied with "INTENSITY".
(Flat in the middle)
And by moving the EQ-like line, you can change the intensity of the IR depending on the frequency band!
(applied as you go down, and not applied as you go up)
Sale venue
PluginBoutique is 10% more expensive because consumption tax is added, but it comes with purchase benefits.
Overview
Easy to understand with explanations in Japanese.
Japanese subtitles available
The following are mainly recommended.
・You can check the processing that brings the material closer to the original sound for the band-passed material. (Around 0:21)
・You can check the processing to increase the clarity of the narration and the processing to remove the low-pass filter. (around 1:30)
・You can check the process of removing the elements of the cabinet from the material recorded with the guitar cabinet and applying the elements of the cabinet to the synth. (Around 2:30)
Adaptive timbre contour linearization
UNFILTER is a real-time plug-in that automatically linearizes the frequency response of your signal by removing filtering effects such as comb filters, resonance and excessive equalization. UNFILTER can also apply the detected filter response to another signal, write it out to disk as an impulse response, and perform mastering-grade adaptive, free-form, and graphic equalization.Whether it's music production, film post, game audio, broadcast, sound design, forensics or engineering, UNFILTER makes time-consuming and seemingly impossible tasks easier by adjusting a single control. .
Features
Automatically detect and remove resonance, equalization, roll-off and comb filter effects from music, location, dialogue and surveillance camera recordings.
You can apply the measured filter response to other signals and place them in the same "acoustic world".
Measured filter responses can be exported to and imported from linear or minimum phase impulse response files (WAV).
Mastering-grade adaptive, freeform, graphic equalization.
Extremely steep 96dB/octave shelving highpass filter
Output limiter for use in batch processing
Time-efficient workflow and UI
For an overview of UNFILTER's use cases in Sound for Picture, Music Production/Mastering, Sound Design, Broadcast and Forensics, visit the UNFILTER Applications page.set straight
UNFILTER automatically detects frequency response anomalies that are basically not part of the original signal, such as resonances, EQ and filter effects.And by adjusting one control, you can remove them while effectively leaving the rest of the signal intact.As a result, previously problematic or unusable recordings can sound good, and good recordings can sound great. Zynaptiq style, in real time, with minimal effort.
adjust
You can also apply the filter response measured from one recording to another, placing the two recordings in the same acoustic "world".You can also apply the measured filter response to noise to create room tones to fill editing gaps.Of course, you can also save your filter responses to disk as linear or minimum-phase impulse response files, building up a library of "colors" at your disposal at any time. Whether you want to blend ADR with production dialogue, make a guitar snippet sound like another snippet, or create a new sound, UNFILTER accomplishes this task quickly and easily.
more equal
UNFILTER is also an EQ. It has 3 mastering grade EQs and an excellent high pass filter.One is that its (un)filtering engine acts as an adaptive program equalizer that is continuously adjusted while the audio is playing.This helps maintain a balanced spectrum when dealing with time-varying audio, such as streaming mixed music at a broadcast station.Freeform Equalizer also features different curve interpolation modes such as gentle slopes, notches and steps.In addition, it is equipped with a 7-band graphic EQ.And finally, there's the ultra-stepped 96dB/octave shelving high-pass filter, which effectively removes low frequency noise and makes you forget there was anything there.
rocket science
How does UNFILTER achieve its functionality?Technically, it performs real-time blind deconvolution and is a state-of-the-art technology rarely seen even in the most advanced research laboratories.Luckily, we never wear white coats.
This technology allows UNFILTER to look closely at your audio, deduce what happened to its frequency response, and create a filter that reverses that process.Sound like rocket science?That's right.But all the technology in the world is useless if it's difficult to use or if it doesn't sound good. The UNFILTER is easy to use and sounds good... well, it sounds great.
Litespeed
UNFILTER's UI is extremely fast and easy to use, allowing you to modify your EQ within seconds by simply adjusting the sliders on your trackball.And for a high degree of customization, every feature and control has been meticulously designed and fine-tuned to optimize your workflow and results.No matter which control you move, the right setting is never far away. UNFILTER is not only a lifesaver, it is also a great time saver.Please try the free trial version.
Application of UNFILTER
UNFILTER is a very versatile frequency response tool with a wide range of uses.Here, I have tried to organize some of them by area of work.Sound for Picture, Music Production & Mastering, Sound Design, Broadcasters, Forensics.
Sound for Picture
UNFILTER is a true workhorse in audio post.The ability to automatically recognize frequency response anomalies is extremely useful for cleaning up production sounds, especially for improving dialogue intelligibility.For example:
Eliminates comb filtering that occurs when multiple "open" mics are mixed into one iso track or near reflective surfaces.
Eliminates room geometry and resonances that occur when shotgun mics are used near off-axis reflective surfaces.
Eliminates roll-off in the recording path and chest resonance in love mics.
Increase the level separation between dialogue and background sounds.
Better harmony between ADR and production dialogue.
Synthesize room tones to fill editing gaps or apply a measured filter response to noise to layer with ADR.
Crowd atmospheres, straws, and dense ambiences are less conflicting with dialogue.
By emphasizing the room filter effect, you can manipulate the apparent distance of the background sound.
"Globalize" SFX and Foley recordings.
Speed up equalizing and low-cut filtering.
It improves mix conversion in non-standard playback environments such as TVs and PCs by removing resonances caused by the frequency response of the playback system.
Save time on mixing.Music production and mastering
Fine-tuning the frequency response of a signal is one of the most commonly encountered tasks in music production and mastering.Recordings of acoustic instruments and live performances often have unwanted peaks and notches, and because instruments in a song are usually played in the same key, excessive accumulation occurs in frequency bands with related pitch fundamentals and overtones. To do.Also, the client may have delivered the track already processed, limiting what you can do to 'fix it in the mix'. UNFILTER automatically recognizes frequency response anomalies and has a highly accurate filtering engine, providing a very flexible solution to these problems.
Below is an example of what you can do with UNFILTER.
- Remove resonance and other frequency response problems from recordings of acoustic instruments and live performances.
- Eliminate any EQ or filtered 'prints' on tracks delivered for mixdown or mastering.
- Remove guitar cabinet coloration or apply to DI guitars.
- Apply corrective EQ to any source in seconds.
- You can exaggerate the tonality of a sound and place it firmly within its frequency window.
- Removes the low-mids from submixes and mixes while preserving the 'body' of the sound.
- You can balance the spectrum of one or more songs.
- The frequency response of outboard EQ and other signal paths can be captured and applied or saved as an impulse response (WAV).
- Emphasizes the natural low end of acoustic bass drums.
- Removes spectral peaks due to corpus resonances such as bass and acoustic guitar.
- Apply measured filter response to tracks overdubbed with different recording settings to blend better.
Sound design
UNFILTER has the ability to completely reshape the spectral contours of a signal, extract the filter response from a sound and apply it to another file, and solo the noise components of a sound, creating new sounds. It has become an excellent tool for designingHere are some ideas on how UNFILTER can help you create unique and new sonic entities.
Extract the filter response curve from one sound and apply it to another sound.
Remove the natural corpus resonance from one sound and apply another.
Open or close the synth's low-pass filter afterwards.
Bring out the sonic side hidden behind other features.
Filter responses can be extracted from sampled sounds and applied to noise and other broadband pseudo/annular sounds to synthesize drones, hiss, and rumble.
You can use the noise monitor to isolate the noise component of your sound.
Generate multiple object state sounds from one file for game audio
Animate the frequency response of static sounds for more lifelike sound
Improve conversion to consumer playback systems such as gamer PCs.
Fine-tune the frequency response of your sound with unprecedented precision.Broadcasting station/ENG
When broadcasting audio, it is important to maintain a consistent and balanced audio spectrum to ensure optimal performance of all downstream systems such as dynamics processing, codecs, playback devices...and most importantly The goal is to provide your audience with a high-quality, consistent, and fatigue-free listening experience.This is by no means an easy task, as the sonic properties of the images used vary greatly, to say the least.Electronic news gathering (ENG) in the field is often limited to small, portable and discreet devices and low-bandwidth transmission systems due to infrastructure, political and safety issues.It is often either low-fidelity footage or no footage at all. UNFILTER's adaptive processing makes even the most challenging footage work, helping you deliver the best possible audio every time. What UNFILTER can do is:
Apply adaptive equalization to time-varying audio content, such as a mixed stream of music audio.
It can improve the intelligibility of voice recordings by removing resonances and roll-offs associated with the signal path.
Eliminating non-linearities in the playback system improves conversion to consumer playback devices.
Reduces color tones caused by transmissions from telephones, megaphones, intercoms, PA systems, etc.
Improve the intelligibility of speech recorded using low-fidelity or covertly worn recording devices.
Improve background sound and voice separation.Forensics
UNFILTER can extract information from recordings in a variety of ways.It can also greatly improve the intelligibility of recorded speech, remove the filtering effect of microphone occlusion, and make buried sounds easier to hear.The main uses are as follows.
Improves the intelligibility of voices recorded with low quality, blocked or damaged audio equipment.
To make sounds buried in other sounds easier to hear.
Better separation of speech and background sounds.
Reduce filtering effects caused by telephone lines.
Eliminates resonances and filtering effects caused by intermediate media such as walls and windows.System requirements
Mac
macOS 10.12 or later (M1 Apple Silicon Macs supported via Rosetta) (32/64-bit)
Intel CPU with 2 cores or more, i7 or better recommended, Apple Silicon supported via Rosetta 2
AU, VST 2.4, VST 3 or RTAS/AAX compatible host software that handles audio as 32-bit floats
AAX Native 32-bit support (requires Pro Tools 10.3.6 or later)
Note: macOS 10.8.5 and later versions may also work, but are not tested internally or officially supported.Windows
Windows 7 or later (32/64 bit)
Intel CPU with 2 cores or more, i7 or higher recommended, Apple Silicon supported via Rosetta 2
VST 2.4, VST 3 or RTAS/AAX compatible host software that handles audio as 32-bit floats
AAX Native 32-bit (Requires Pro Tools 10.3.6 or higher.)Important notes
An iLok account or iLok 2-based activation is required to register this product.
Internet connection required for software activationCopy protection
Zynaptiq products use the latest PACE copy protection, allowing activation to be placed on your machine or iLok 2* (sold separately).A free iLok.com account is required to use our software, including demos.However, if the machine can connect to the Internet,You don't necessarily need an iLok 2 dongle(Systems without internet connection require an iLok 2 device for activation).All required software is installed with the plugin, but it's usually recommended to download the latest version directly from iLok.com.
Please Note: Older first generation iLok's are not supported.
CPU load
The Zynaptiq plugin is highly optimized but uses more CPU for complex operations.
The Zynaptiq plugin is highly optimized but uses a lot of CPU due to the complexity of the magic it performs.Take advantage of our free trial to assess whether your system has enough resources to effectively use the software.
Zynaptiq recommends setting the playback buffer size to at least 512 and ideally 1024 samples for optimal performance.
As Zynaptiq's plugins have unique features not found in other software, Zynaptiq strongly recommends reading the user manual to get the most out of it
Comment