If you buy anything at ADSR Sounds in March, you can get Audio Blast's Blast Delay (until 3/3)

ADSR's purchase benefits have been updated.

Audio Blast'sBlast Delay ($45 value).

The biggest feature of Blast Delay is programming parameters in sequence.

The programmable parameters are as follows.

I think it's pretty convenient to be able to program the "Time" and "Filter" parameters in sequence.

I'll add a sound demo at a later date, because I think you'll probably buy something.

Overview

Blast Delay is a simple, intuitive delay with a built-in parameter sequencer.

Each knob's motion sequence loop can be programmed at independent speeds.

Tweak effects live and recall all parameters in the sequencer.

The Sequencer allows you to sequence all the parameters of the Blast Delay and pre-program the parameter's motion sequence in a loop.

The sequencer is synced to the host tempo, and each step of the sequencer represents a percentage of the value of the parameter from 0-100%.

Features

DRY/WET (Dry/Wet): The Dry/Wet control adjusts the balance between the processed and dry signal.
VOLUME: The Volume parameter adjusts the volume of the processed signal.
TIME: Adjusts the delay time in milliseconds (from 1 bar to 1/128 when the sync button is activated).
FEEDBACK: A parameter that sets how much of each channel's output signal is fed back to the input of the delay line.
FILTER: -100 to 0 acts as a low pass filter, 0 to 100 acts as a high pass filter.
SYNC: When the Sync switch is on, the delay time will sync to the tempo from 1 bar to 1/128. With the Sync switch off, the delay time reverts to milliseconds.In this case, to edit the delay time, click and hold the delay time knob and drag it up
PING PONG: Activating the ping pong switch causes the signal to jump from left to right output
FREEZE: A button that loops the delay buffer.The input signal is no longer processed by the delay buffer.
POLARITY: Inverts the phase of the effect by 180°.This effect becomes more interesting at higher feedback with lower values ​​of TIME
PITCH: When the pitch button is turned on, the pitch changes when you change the delay time, similar to how old tape delay units work
PARAMETER SEQUENCER: The Sequencer allows you to sequence and pre-program all Blast Delay parameters.