If you have Denise's Punisher, you can get God Mode and Sub Generator in Apgre (up to 1/3)
This is good.
If you have checked this blog for a long timePunisher acquired for freeYou can get both God Mode and Sub Generator at an upgre price of $ 14.
But God Mode and Sub Generator are attractive, honestly I'm worried.
God Mode Overview
God Mode introduces new push-pull technology that gives you full control over which frequencies are saturated or distorted.Node EQ graphs and linear phase filters give you endless options to color your sound.
God Mode uses push-pull technology inspired by the legendary analog Pultec EQ of the 50's and was widely used for broadcasting and mixing in the 70's and 80's. The Pultec EQ "pushes" the gain of a particular frequency band into the tube circuit and "pulls" it again to smooth out the frequency response.This gives you a closer-to-original sound, but adds warmth to the boosted frequency band. God Mode introduces a modern version of this technique.
The first step in using God mode is to boost or "push" certain frequencies in the track that you want to be more saturated or distorted.For example, you can use one shelf to boost high frequencies and one peak to boost specific colors and resonances.Pushing these frequencies harder into the saturation algorithm will, of course, be more affected.The second step is to decide if and how much to apply a "pull" to the boosted frequency.This gives you creative control over the amount of coloring and allows you to perfectly balance the frequency response of your track.The result is a beautifully saturated signal that is specially colored according to the "pressed" frequency.
God mode isn't the only one.There is a "live" mode for recording, which uses a regular, non-latency filter instead of a linear phase filter.It features side chains to create a rhythmic distortion effect, allowing you to pan the wet and dry sounds separately.In addition, one of the three drive effects uses the "on the steroids" version of Bad Tape's Tape Analog VM ™ algorithm.Add subtle saturation to your master, or add crazy over-the-top distortion effects to your bass, vocals, and synths.
Overview of Sub Generator
Adjust the sub-frequency to create the perfect low end.Tune the low end of your drum recording.Redesigned the low end of sound effects and instruments.
denise's Sub Generator is a great way to quickly adjust the bass of a track you're mixing with an easy-to-use GUI and controls. Inspired by the same envelope filter concept as the Noize 2 plug-in, this plug-in allows you to control this tricky frequency range in your mix.
With the denise Sub Generator, you can quickly set subs that match the tone and frequency of your source signal and apply it to any sound or signal in your DAW.You can easily tune your drums by tweaking frequencies and notes to add or replace additional subs to your tracks.This plug-in can also be used as a stand-alone sub for deeper basslines, make-up distant mic recordings for drums and vocals.Add weight to your bottom end and feel it for yourself.
Comment